dZTD-116A SERIES Explosion-proof Platform Status Light
It is installed on the offshore mobile platform, fixed platform, offshore wind power booster station and wind power converter station to indicate the current operation status of the platform.
Key:
Category:
Explosion-proof LED light
产品附件：
Hotline:
dZTD-116A SERIES Explosion-proof Platform Status Light
图文详情
APPLICATION SCOPE
-Installed on offshore mobile platform, fixed platform, offshore wind power booster station, wind power converter station, used to indicate the current operating status of the platform.
MAIN FEATURES
1. The shell and exposed standard parts are made of 316L stainless steel;
2. A high-intensity UV-resistant PC lampshade is used;
3. Adopt high-efficiency, long-life, green and environmentally friendly SMD LED light source;
4. The lamp has a high reliability constant current driving power supply inside;
5. The luminaire is equipped with a dedicated control box, and the control box is connected to the luminaire with a multi-core cable.
STANDARDS AND CERTIFICATES
China Classification Society Rules for the Classification of Sea-going Steel Ships and its revised notification
IEC60079 EN60079 IEC61241 IEC60598 IEC60092 GB3836 GB12476 GB7000
The product has obtained China National Explosion-proof Certification
Note: This product has the same type of non-explosion-proof products, the models are ZTD-116A and ZTD-116 respectively, the basic parameters are the same as dZTD-116A and dZTD-116.
Related Display
It is widely used in all kinds of ships, offshore engineering platforms, electric power, metallurgy, chemical industry and other fields, and is installed in places with lake water, dripping water, condensate and other places requiring high protection level. Such as engine room, cargo hold, axle leg, pipe lane, open deck, bathroom, laundry, etc.
dFH220-L Explosion proof helideck floodlight 15W
It is installed on the outer edge of the helideck surface as the auxiliary lighting of the whole helideck, and is used for the helideck less than 16 meters.
ExJB increased safety explosion-proof junction box
It is used for the transfer and tapping of power cables, instruments, signals and other cables of ships and offshore platforms;
It is applicable to the start, stop and movement indication of three-phase asynchronous motor with rated voltage of AC690V and below, and is equipped with overload, short circuit, phase loss and undervoltage protection for the motor
Messages
