deF220-8 Explosion proof helideck boundary light
It is installed at the edge of the helideck to outline the periphery of the whole helideck, and is used for the helideck less than 16 meters.
Key:
Category:
Helicopter Landing Aids System
产品附件：
Hotline:
deF220-8 Explosion proof helideck boundary light
图文详情
APPLICATION SCOPE
The utility model is installed at the edge of the helicopter deck and used to outline the outer contour of the entire helicopter deck. For helidecks over 16m.
MAIN FEATURES
1.The shell is made of 316L stainless steel，Lampshade: Heat resistant PC；
2.Surface mount type installation, height 250mm
3.It adopts high light efficiency, long life, green and environmental protection SMT LED light source，the average life of LED is more than 50000 hours；
4.Light color: Green / yellow / red / Blue / white;
5.The light is equipped with a high reliability constant current driver；
Light distribution rules:
a.Spacing between adjacent lights ≤ 3m;
b.For square or rectangular decks, at least 4 lights on each side;
c.Light must be installed at the vertex.
STANDARDS AND CERTIFICATES
IEC 60598-1 IEC 60092-306 IEC 62722-2-1 GD03-2008 GB 7000 GB 3836 GB 12476 GB 19510.1 GB/T 2423.18 GB 4208 CAP 437（2018）
ICAO Annex 14 Volume 1 Appendix 1（Eighth Edition）
Product has been certificated by China National Explosion-proof Certification；
Product has been certificated by china classification society
Related Display
It is widely used in all kinds of ships, offshore engineering platforms, electric power, metallurgy, chemical industry and other fields, and is installed in places with lake water, dripping water, condensate and other places requiring high protection level. Such as engine room, cargo hold, axle leg, pipe lane, open deck, bathroom, laundry, etc.
dFH220-L Explosion proof helideck floodlight 15W
It is installed on the outer edge of the helideck surface as the auxiliary lighting of the whole helideck, and is used for the helideck less than 16 meters.
ExJB increased safety explosion-proof junction box
It is used for the transfer and tapping of power cables, instruments, signals and other cables of ships and offshore platforms;
It is applicable to the start, stop and movement indication of three-phase asynchronous motor with rated voltage of AC690V and below, and is equipped with overload, short circuit, phase loss and undervoltage protection for the motor
Messages
